Cylindrical Door Locks: Versatile Security Solutions
Cylindrical Door Lock What is Cylindrical Lock?Cylindrical locks are common, versatile, and available in various finishes, door thicknesses, and strike options. They offer fewer decorative trim options compared to mortise locks but can be found in vandal-resistant models for added durability in high-traffic areas. What are Lock Components?Cylindrical locks include a lock chassis, latch bolt, operable trim (levers/knobs), and roses behind the trim. Keyed functions have a cylinder in the lever/knob, with traditional cylinders requiring full lock removal for re-keying. What are Lock Benefits?Cylindrical locks come in different grades for varying traffic levels. Grade 1 is for high-traffic areas, Grade 2 for moderate use, and Grade 3 for residential settings. They can be paired with deadbolts for extra security in some applications.
Enhancing Fire Safety with Hollow Metal Doors
Types of Fire-Rated Hollow Metal Doors for Enhanced Safety and Durability Hollow metal doorsFire-rated door assemblies play an important role in saving lives and minimizing property damage by providing safe egress and compartmentalizing smoke, flames, and when required, dangerous radiant heat. This combines the door, frame, hardware, and glazing as one assembly. These components are normally tested as separate products by a nationally recognized testing agency and then listed, labeled, or classified for use in fire door assemblies. However, there are instances where specific components are tested together and therefore must be used together to maintain the fire rating.Fire door assemblies are tested to NFPA 252, Standard Methods of Fire Tests of Door Assemblies or UL 10 B, Standard for Fire Tests of Door Assemblies, or UL 10 C, Standard for Positive Pressure Fire Tests of Door Assemblies. Like fire window assemblies, fire door assembly testing includes fire endurance and hose stream tests. Note that building codes throughout the US typically stipulate that 20-minute doors are exempt from the hose stream test.Fire-rated doors are tested following the following standards as per NFPA 252: UL 10B, Fire Tests of Door Assemblies (neutral or negative pressure) UL 10C, Positive Fire Pressure Tests of Door Assemblies Honeycomb DoorThe door can bear Up to 1 1/2 hours.The door shall be a minimum of 44 mm thick.As door infill, the rigid honeycomb structure is integrated with the door to form hundreds of small I- beams with the door, with a uniform thickness and flat surface that makes it possible to add lites, louvers, or other features as Optional. It reinforces the full width and height of the door. Honeycomb Core Doors can be used in exterior or interior applications. A door with a fire-resistance rating (sometimes referred to as a fire protection rating for closures) is used as part of a passive fire protection system to reduce the spread of fire and smoke between separate compartments of a structure and to enable safe egress from a building or structure. Rockwool DoorThe door can bear Up to 3 Hours.The door shall be a minimum of 44 mm thick.As door core, Rockwool is used to fill in cavities of steel-stiffened doors. Steel Stiffened doors are used mainly for exterior doors, where rigidity is important. They are available in varying degrees of strength and quality. While the thickness of the stiffeners can vary, the majority are made of 20-gauge steel. Heavier gauges sometimes are used, particularly on security doors. Spacing between stiffeners may vary. The Rockwool Core used for its fire doors has a high service temperature that can reach 780oC . Additionally, the core is water-repellent, non-hygroscopic, and non-capillary. Fiberglass DoorThe door can bear Up to 3 hours.The door shall be a minimum of 44 mm thick.Fiberglass is an extremely durable material that can maintain its shape for decades with little or no maintenance. This property makes them ideal for fire doors, as they will not warp or distort under extreme heat. In addition, materials are resistant to fire and smoke and will not contribute to the spread of flames. Fiberglass is non-conductive, meaning it will not conduct heat or electricity, making it an ideal material for use in electrical applications. Fiberglass are better material for fire doors because it can withstand higher temperatures without warping or melting.
Ansul Portable Fire Extinguishers
Fire Safety Solutions – Sentry CO₂ and RED LINE Cartridge-Operated Fire Extinguishers Sentry CO₂ Extinguishers Fire and Hazard Control (FHC) Sentry CO₂ fire extinguishers are engineered to protect indoor environments from Class B (flammable liquids and gases) and Class C (energized electrical equipment) fires. These extinguishers are ideal for areas where clean-agent suppression is necessary, such as laboratories, data centers, and telecommunication rooms. They offer superior performance in environments with drafts, thanks to their wind-resistant discharge. Available in 10 LB, 15 LB, and 20 LB models, Sentry CO₂ extinguishers meet stringent quality standards and are UL and FM-approved. Each model is thoroughly tested to comply with the Ansul Quality Assembly Manual (QAM), ensuring reliability and efficiency. With a 5-year lifespan, these extinguishers offer long-lasting protection for critical fire safety applications. RED LINE Extinguishers Designed for industries with elevated fire risks, such as chemical, petrochemical, mining, and construction, RED LINE cartridge-operated fire extinguishers are built to meet the challenges of large-scale fires. Their cartridge-operated system enables quick recharging, enhancing both reliability and ease of maintenance. With durable carbon steel construction, these extinguishers are resistant to impacts, vibrations, and corrosion, ensuring performance in the harshest environments. The extinguishers are coated with a protective polyester powder paint that resists cracking and chipping, ensuring long-lasting durability. RED LINE models are available in 20 LB and 30 LB sizes, filled with either FORAY or Purple K powder, depending on the fire risks present in the environment. UL and FM-approved, they adhere to the highest safety and performance standards. With a 12-year lifespan, these extinguishers offer superior fire protection and long-term reliability for high-risk industrial applications. Comprehensive Fire Protection Sentry CO₂ and RED LINE extinguishers offer unmatched fire suppression capabilities across a wide range of industries. Both models are engineered for specific applications, ensuring that facilities, whether indoor or high-risk industrial environments, are equipped with the most reliable fire safety solutions. Sentry CO₂ extinguishers are perfect for environments that require clean suppression agents and minimal residue, while RED LINE extinguishers are designed to tackle more hazardous fire scenarios with quick recharging and superior construction. With advanced features, high durability, and strict quality control, both product lines provide critical fire protection. These extinguishers are trusted by industries worldwide to safeguard lives and assets against the unpredictable nature of fires.
Quick Attack Foam Cart
Most fire incidents can be resolved by quick decisive action and the effective application of the correct extinguishing medium. Chief Fire Quick Attack Cart does the same for any hydrocarbon or any flammable chemical spill fire at any warehouse or petrochemical plants. Quick Attack Cart is effortlessly portable and can be handled by one person. Equipped with solidrubber wheels or optional with the pneumatic wheels, which can be easily maneuvered on pavements or gravels. Quick Attack Cart is designed with a rigid and compact Foam tank manufactured with SS316 sheets or optionally with GRP to store foam for adequate operational time. Foam tank is provided with a breathing valve to balance pressure inside the tank with ambient pressure and isolate the tank from external humidity, dust or any other debris. Foam tank is also equipped with a level gauge to monitor foam level inside the tank plus a drain plug to flush foam or replace foam inside the tank. Foam Monitor and master stream nozzle with an inbuilt educator is available with multiple options on inlet connections, materials, flow rates etc. designed for use with Class A & Class B foam, Including AFFF & Fluro-protein. Combination of straight stream and variable fog patterns are available.
Fire Hose Reel Station
The Fire & Hazard Control (FHC) Series 400 hose reel enclosure assembly is constructed to the highest industry standards. The unit is an ideal combination that utilizes strategic components built by leading suppliers from around the globe. REDA integrates this technology into a unique solution that provides for both rapid access and quick deployment. Each hose reel enclosure meets strict purchaser requirements and industry standards in painted steel or stainless steel materials. Series 400 hose reel stations are designed for rapid response use in hazardous areas at industrial plants. The reels are supported with a structural steel base and have mounting pads for solid ground securement. Each station incorporates a manual rewind hose reel with various hose diameters and LPM/ GPM flow capacity nozzles. Water supply to the reel can be from either domestic or fire water mains.A foam system option can be incorporated into either enclosure reel stations or exposed reel stations without covers. All hose reel stations can be equipped with optional foam supply tanks that are integrated into the standard support system. In addition, many types of in-line foam eductors and foam nozzles are available. The piping is engineered to permit use of water only or foam only applications. The foam tank, LPM/GPM foam flow, and foam nozzles can be designed for specific hazards and water supply availability.
Thanks CPS
Mar, 2024 Thanks, CPS for acknowledging our expertise. Visit our LinkedIn page to get more info about this.
Partnership with Tsusho Jamjoom
Apr, 2024 We are so proud of our partnership with Tsusho Jamjoom over Hino Trucks..
Security Bollard Update
Jun, 2024 We are thrilled to announce that we have designed, developed, and successfully crash-tested a shallow-mounted fixed bollard! This innovation is entirely manufactured in the Kingdom of Saudi Arabia, representing a significant advancement in local innovation. The bollard is rigorously tested and boasts an impressive ASTM F2656 M50P1 crash rating, ensuring it can withstand significant impact. This paves the way for enhanced security in a variety of settings, from pedestrian zones to building perimeters. We are committed to developing high-quality, innovative products that meet the specific needs of the Saudi market. This shallow-mounted fixed bollard is a testament to that commitment. Stay tuned for further details on this exciting new product! For more information, please click here.
Foundation Day
Feb, 2024 بمناسبة #يوم_التأسيس الذي يعكس تاريخنا وحضارتنا وإرثنا احتفلنا مع موظفينا بإنجازاتنا وتطلعاتنا في خدمة المهنة و المجتمع. #يوم_بدينا
PDQ Manufacturing
Apr, 2024 We are thrilled to unveil the localization of PDQ Manufacturing‘s esteemed hardware business, previously based in Lancaster, PA, USA, now being manufactured right here in Saudi Arabia. This strategic partnership marks a significant milestone as we embark on producing door hardware locally, designated as an “Alternate Manufacturing Location” delivering top-tier ANSI/BHMA/UL-listed products not only within the Kingdom but also throughout the GCC region. By bringing PDQ’s hardware business to Saudi Arabia, we are not only contributing to the growth of our local economy but also facilitating easier access to these indispensable products for our valued customers across the region. This localization initiative perfectly aligns with our steadfast dedication to bolstering local industries and catalyzing economic advancement in Saudi Arabia under Saudi Vision 2030. We eagerly anticipate serving our customers with premium hardware solutions crafted right here in our homeland. Stay tuned for further updates as we forge ahead, expanding our product offerings and strengthening our footprint in the market.